How to spray water on the wiper H6: Hot topics and operation guides on the Internet in the past 10 days
Recently, the topic of car maintenance has become increasingly popular on major platforms, among which "using the wiper water spray function" has become the focus of novice drivers. This article combines the hot spots on the Internet to provide you with a detailed analysis of the Haval H6 wiper water spray operation steps and solutions to common problems, and also attaches hot topic data in the past 10 days.
1. Haval H6 Wiper Spray Operation Guide
1.Operation steps
| steps | Operating Instructions |
|---|---|
| 1 | Start vehicle power (no need to start the engine) |
| 2 | Find the control lever on the right side of the steering wheel |
| 3 | Gently pull the control lever toward the driver |
| 4 | Hold it for 2 seconds to activate the water spray function |
| 5 | Automatically completes glass cleaning after loosening |
2.Things to note
| matters | Description |
|---|---|
| Glass water selection | Anti-freeze type is required in winter (-30℃) |
| Water spray frequency | No more than 5 seconds at a time to prevent the motor from overheating |
| Nozzle adjustment | A fine needle can be used to fine-tune the injection angle |
2. Hot topic data on the entire network in the past 10 days
| Ranking | topic | Platform | heat index |
|---|---|---|---|
| 1 | Winter battery life of new energy vehicles | 9,852,341 | |
| 2 | Comparison of vehicle-mounted intelligent systems | Douyin | 7,635,289 |
| 3 | Wiper usage tips | Baidu knows | 6,124,756 |
| 4 | Self-driving safety controversy | Zhihu | 5,893,402 |
| 5 | Tips for saving money on car maintenance | little red book | 4,761,335 |
3. Solutions to common problems
1.Water spray is weak or unresponsive
| Possible reasons | Solution |
|---|---|
| Not enough water in the glass | Replenish special glass water in time |
| Nozzle clogged | Use compressed air or a fine needle to clear the |
| blown fuse | Check F17 fuse (15A) |
2.Water spray position offset
| phenomenon | Adjustment method |
|---|---|
| Spray too high | Press down on the nozzle with a paper clip |
| Injection too low | Use a paper clip to lift the nozzle |
| Uneven left and right | Adjust the nozzle angles on both sides separately |
4. Extended reading: Main points of wiper system maintenance
1. Check the wiper strip regularly and it is recommended to replace it every 6 months;
2. In northern areas, ordinary glass water must be drained before winter;
3. When the vehicle is parked for a long time, erect the wiper arm to prevent the strips from adhering;
4. If there are stubborn stains on the front windshield, you should clean it manually first to avoid wearing the strips.
Through the above structured data display and operation instructions, I believe you have mastered the correct method of using Haval H6 wiper water spray. It is recommended to save this article for emergencies and follow us for more car usage tips.
check the details
check the details
en
