How to lay ceramic tiles to make them look good
Ceramic tiles are an indispensable part of home decoration, and their paving effect directly affects the visual beauty of the overall space. How to make ceramic tile paving both beautiful and practical? This article combines the hot topics and hot content on the Internet in the past 10 days to provide you with a detailed guide.
1. Popular trends in ceramic tile paving (latest data in 2023)
| Trend type | Popular keywords | Search popularity (index) |
|---|---|---|
| Large format ceramic tiles | 900x1800mm, rock slab | 85% |
| Special-shaped paving | Herringbone spelling, fish bone spelling | 78% |
| Color matching | Morandi color, cream style | 92% |
| functional tiles | Anti-slip bricks, antibacterial bricks | 65% |
2. Five key steps for laying ceramic tiles
1.Basic treatment: Make sure the wall or floor is flat, clean, and free of hollows. Waterproofing is required if necessary.
2.Tile typography: Design the paving plan according to the size of the space to avoid narrow bricks (it is recommended to reserve a 5mm gap).
3.Material selection: Use high-quality tile adhesive (C1 standard is recommended for indoors and C2 standard for outdoor use).
4.Paving process: Use a "cross positioner" to keep the gaps even, and use suction cups to assist in paving large bricks.
5.Later maintenance: Avoid stepping on it within 24 hours after paving. Sealing can only be done after 72 hours.
3. Comparison of paving techniques in different spaces
| space type | Recommended tile specifications | Best way to lay | Things to note |
|---|---|---|---|
| living room | 800x800mm or more | Gongzipin or Tongpu | Pay attention to the connection with the skirting line |
| kitchen | 300x600mm | Vertical stickers show floor height | Choose high temperature resistant bricks for the stove area |
| bathroom | 300x300mm | wall to floor joint | The ground needs to have a 1% slope |
| balcony | Wood grain brick | herringbone spelling | Choose UV protection |
4. 3 detailed techniques to enhance beauty
1.Beautiful seam color selection: Dark bricks with light-colored seams (contrast effect), light-colored bricks with same-color seams (invisible effect).
2.Closing treatment: It is recommended to use the Begonia angle craft for the Yang corner, which is more beautiful than the corner strips.
3.Lighting matching: Matte tiles are suitable for scattered light, and glossy tiles are suitable for point light sources, which can enhance the three-dimensional effect.
5. Solutions to common paving problems
| Problem phenomenon | Possible reasons | Solution |
|---|---|---|
| empty drum | The base layer is not moist or the glue is not full | Single block emptying rate >5% requires rework |
| Uneven | Leveling layer error＞3mm | Use toothed scraper to control glue thickness |
| crack | No expansion joints left | The gap should be ≥ 2mm (floor heating room ≥ 3mm) |
6. Expert advice
1. When purchasing ceramic tiles, you should take a few more pieces and place them on the ground to observe the actual effect. Just looking at the samples can easily cause color differences.
2. For complex parquets, it is recommended to make CAD layout drawings first, and it is better to control the loss rate at 8-10%.
3. After the paving is completed, it is recommended to use a professional hollow hammer to inspect the entire house, focusing on the four corners.
Through the above methods and data reference, I believe you will be able to create a ceramic tile paving effect that is both beautiful and practical. Remember, good workmanship can give ordinary tiles a high-end look, while poor construction can ruin expensive materials.
check the details
check the details
en
